16866 - Handheld RFID Reader

Larger Screen Display, Stronger UHF Performance

[EN] Model 16866 UHF is a well-built handheld terminal with large-screen-display. Self- developed UHF module integrated with Impinj R2000 chip enables the 16866 UHF to offer outstanding sensitivity and stability. Built with Android 9.0 and Qualcomm Octa-core processor, it features remarkable configurations and accessories. Besides, it can be equipped optionally with a barcode-data-collection engine as well. All these features make the device perfectly suitable to be adopted in industries like Logistics & Express, Warehouse, Retail & Asset management to assist the customers.

[VN] Máy quét RFID cầm tay Model 16866 là một thiết bị di động hoạt động trên nền tảng Android 9.0 . Được trang bị bộ vi xử lý mạnh mẽ có thể hoạt động 12 giờ liên tục. Máy được tích hợp chip xử lý R2000 Impinj (USA) có khả năng đọc rất tốt , nhạy và có thể đọc số lượng lớn các thẻ UHF RFID. Thiết bị phù hợp sử dụng trong ngành công nghiệp sản xuất, nhà máy, kho bãi & Logistics , bán lẻ, quản lý tài sản và quản lý ra vào…

Specifications
Physical Characteristics
Dimensions 160.0 x 76.0 x 15.5 mm / 6.3 x 2.99 x 0.61 in.
Weight 287 g / 10.12 oz. (device with battery)
Display 5.5-inch high definition full display (18:9) , IPS LTPS 1440 x 720
Battery 4420mAh(typ) / 4300mAh(min) removable main battery, 5200 mAh optional pistol battery, support QC 3.0 and RTC
Standby: up to 490 hours (only main battery ;

WiFi: up to 470h; 4G: up to 440h)
Continuous use: over 12 hours (depending on user environment)
Charging time: 2.5 hours (charge device by standard adaptor and USB cable)

Touch Panel Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported
Speaker Support
Vibrator Support
Microphone 2 Microphones, 1 for noise reduction
Interfaces USB Type-C, USB 3.0, OTG, extended thimble
Card slot 1 slot for SIM card, 1 slot for SIM or TF card
Keypad 1 power key, 2 scan keys, 2 volume keys, 1 PTT key
Sensors Gravity sensor, proximity sensor, light sensor, accelerometer sensor, vibration motor
Indicator LED Power, charging, status indicator
User Environment
Operating Temp. -20 ℃~+50 ℃
Storage Temp. -40 ℃~+70 ℃
Humidity 5% RH – 95% RH non condensing
Drop Specification Multiple 1.8 m / 5.91 ft. drops (at least 20 times) to the concrete across the operating temperature range;
Multiple 2.4 m / 7.87 ft. drops (at least 20 times) to the concrete after installed rubber bumper
Tumble Specification 1000 x 0.5 m / 1.64 ft. falls at room temperature
Sealing IP65 per IEC sealing specifications
ESD ±15 KV air discharge, ±8 KV conductive discharge
Developing Environment
Operating System Android 9.0; GMS, 90-day security updates, Android Enterprise, Zero-Touch, FOTA, Soti MobiControl, SafeUEM supported
SDK Software Development Kit
Language Java
Tool Eclipse / Android Studio
Performance
CPU Qualcomm 1.8 GHz Octa-core
RAM+ROM 3 GB + 32 GB
4 GB + 64 GB (optional)
Expansion Supports up to 128 GB Micro SD card
UHF1
Engine CM2000-1 module based on Impinj Indy R2000
Frequency 865-868 MHz / 920-925 MHz / 902-928 MHz
Protocol EPC C1 GEN2 / ISO18000-6C
Antenna Circular Polarized Antenna (4dBi)
Power 1W (30dBm, +5 dBm to +30 dBm adjustable)
2W Optional (33dBm, for Latin America, etc.)
R/W range Up to 15 m (open outdoors, Impinj MR6 tag)
Fastest Read Rate 900+ tags/sec
Communication Mode Pin Connector
Note *Ranges and rates depend on tags and environment
This function is optional
UHF2
Engine CM2000-1 module based on Impinj Indy R2000
Frequency 865-868 MHz / 920-925 MHz / 902-928 MHz
Protocol EPC C1 GEN2 / ISO18000-6C
Antenna Circular Polarized Antenna (3 dBi)
Power 1W (30 dBm, support +5~+30 dBm adjustable)
2W Optional (33 dBm, for Latin America, etc.)
R/W range Up to 10 m (open outdoors, Impinj MR6 tag)
Fastest Read Rate 900+ tags/sec
Communication Mode Pin Connector / Bluetooth
Note *Ranges and rates depend on tags and environment
This function is optional
Communication
WLAN Support 802.11 a/b/g/n/ac/d/e/h/i/k/r/v,2.4G/5G dual-band, IPV4, IPV6, 5G PA;
Fast roaming: PMKID caching, 802.11r, OKC;
Operating Channels: 2.4G(channel 1~13),5G ,Depends on local regulations;
Security and Encryption: WEP,WPA/WPA2-PSK(TKIP and AES),WAPI- PSK—EAP-TTLS,EAP-TLS, PEAP-MSCHAPv2, PEAP-LTS,PEAP-GTC,etc.
WWAN (Europe, Asia) 2G: 850/900/1800/1900 MHz
3G: CDMA EVDO: BC0
WCDMA: 850/900/1900/2100MHz
TD-SCDMA: A/F(B34/B39)
4G: B1, B3, B5, B7, B8, B20, B38, B39, B40, B41
WWAN (America) 2G: 850/900/1800/1900 MHz
3G: 850/900/1900/2100 MHz
4G: B2, B4, B5, B7, B12, B17, B38
Vo-LTE Support Vo-LTE HD video voice call
Bluetooth Bluetooth 4.2/4.1+HS/4.0/3.0+HS/2.1+EDR
GNSS GPS/AGPS, GLONASS, BeiDou,Galileo,internal antenna
Note *C66 models being manufactured for Turkish Market, do not include Voice Call (Phone Call) function. WAN module included on those models only support DATA transfer.
Barcode Scanning
2D Scanner Zebra: SE4710 / SE2100; Honeywell: N6603; E3200; IA166S
1D Symbologies UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
2D Symbologies PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX),etc.
Note *This function is optional
Camera
Camera Rear 13 MP Autofocus with flash
NFC
Frequency 13.56 MHz
Protocol ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.
Optional accessories
Accessories Separate handle with one button;
Handle + battery (handle battery 5200mAh, one button) ;
UHF back clip + handle (5200mAh, one button) ;
Wrist Strap; Rubber Bumper; Charging Cradle
Applications
Warranty and Delivery
  • One years warranty
  • We ship internationally
  • Delivery method : FexdEx , UPS and DHL
How can we help you?
 

If you want to know more about RFID applications, please visit our other related blogs. Also, you are welcome to contact us to learn more about RFID products.

SPECIAL OFFER : Buy Software Get FREE Hardware !